| |
|
Jet JW1007 4-Inch Blastgate
JET
JET
Works great as a connection point for tools
I have blast gates permanently mounted on my saws, and use the Jet quick-disconnect fittings and flex hose to connect the tools to the dust collector. Works great. Can't comment on the gate plugging as I never close it.
|
|
|
|
|
|
| |
|
Quakehold! 33111 Museum Gel, Clear
Quakehold!
Quakehold!
Museum gell
This is a very great product, have used it for many things, that you do not want to get broke or stolen.
|
|
|
|
|
|
| |
|
Bosch TS1004 Table Saw Dust Collector Bag
Bosch
Bosch
Better than piling dust on your floor
First, I don't have a dust collection system, but do have a shop vac and the Bosch dust bag is still the 2nd best of my 3 options, and probably the best option for the money period. The bag has a pretty good capacity, and in itself doesn't seem to cause any clogging ...
|
|
|
|
|
|
| |
|
Jet JW1044 4-Inch to 2-1/2-Inch Reducer
JET
JET
You may want the JW1000
There seems to be some confusion/frustration about this item so consider if this is the item you actually need. This product is not designed to go directly from a 2 1/2" dust port to a 4" hose. If that is what you want get the Jet JW1000 4-Inch to 2-1/4-Inch OD ...
|
|
|
|
|
|
| |
|
RotoZip RZVAC1 Dust Extraction Adapter Kit
Rotozip
Rotozip
YES - BUY THIS FOR SURE!!!
The rotozip is a great tool, but I usually don't use it because of all the dust it raises. I put this adapter on today to route a trough up the plaster/stucco wall to conceal speaker wires into. ABSOLUTELY NO DUST AT ALL! This really worked great for the speaker ...
|
|
|
|
|
|
| |
|
JET JW1317 4" Wire Hose Clamp - Each
JET
JET
Great Clamp!
I used a whole lot of these when I set up my dust collection system, and I can say that the hype is justified. These thin metal clamps slip between the ridges on the flex hose perfectly to create a very air-tight connection. I also appreciate the phillips head on the ...
|
|
|
|
|
|
| |
|
Toro Universal Leaf Collector with 8-Foot Hose #51500
Toro
Toro, 2006
Not for Gas Blower Vacs
I did not read the product description close enough when purchasing this leaf collector system. Or maybe I did, but figured that I could make it work for my gas blower vac. Overall, this product is well constructed. I was able to modify it to fit my gas blower vac, ...
|
|
|
|
|
|
| |
|
Black & Decker PVF100 Replacement Filter for PHV100/PHV1800 18-Volt Pivoting Vac
Black & Decker
Black & Decker, 2006
just as expected
sent in a timely manner, and what a great deal this was......much more expensive elsewhere!
|
|
|
|
|
|
| |
|
Jet 4" Dust Collection Accessories
JET
JET
|
|
|
|
|
|
| |
|
Tenergy 14.4V 2400mAh NiCD Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --- New!!! A ...
Tenergy
Tenergy
I am terrible at soldering and I did it!
Excellent replacement item. Super easy to solder and get the Roomba back up and running. Got the 2400 mAh battery and lasted a good 1 hour and 20 min. Now that I know how easy it is, I will spend a little more for the 3600 mAh battery. I am so impressed with how easy ...
|
|
|
|
|
|
| |
|
Fein 913036K01 3-Pack of Vacuum Bags
Fein
Fein
extend filter life and time between cleanings
These bags, although a bit pricey, extend filter life and greatly extend the amount of time you can use the vacuum before having to empty it out. They make a world of difference! That's because they act like a whole extra filter. To save money, I have found that you ...
|
|
|
|
|
|
| |
|
JET JW1314 2-1/2" Wire Hose Clamp - Each
JET
JET
Great for Cheap Shipping!
I found this item perfect to bump my order up to $25 for Super Saver Shipping! Other than that, I have no idea what I'll do with it! Highly recommended!
|
|
|
|
|
|
| |
|
Jet JW1047 4-Inch Quick Disconnect
JET
JET
Jet JW1047 4inch quick disconnect
My dust collector system has a 4 inch hose and a 2 inch end on the saw (dust connector). So I needed this quick disconnect to attach the two different size hoses together. It works very well for my needs
|
|
|
|
|
|
| |
|
PSI Woodworking DBGULP Big Gulp Dust Hood
PSI Woodworking
PSI Woodworking
It appears that it will work just fine.
Item came doubled boxed and in great condition. I haven't tried it yet but it looks like it will work just fine. It's not rocket science. If you hook up a good dust collection system to it, It will work good.
|
|
|
|
|
|
| |
|
Gerber 22-41576 Gator Machete with Sheath
Gerber
Gerber
Great Tool!
This is an excellnt value for the moeny. This is a very versatile tool. It has come in very handy clearing scrub brush from behind my property.
|
|
|
|
|
|
